Calls are rightfully given the highest priority, considering they fulfil a phone’s primary function. But what happens if you miss an important call, and even worse, the notification for the missed call never appears? This guide will go in detail to explain the reasons behind the issue and try and break down the steps to isolate and eliminate the problem.

What Does “Missed Call Notification Not Showing” Mean?

The phrase ‘missed call notification not showing‘ doesn’t inherently indicate an error, but rather a bug or underlying issue. It means that when you receive a call, there’s no notification displayed in your notification pane afterward.

Most people wouldn’t notice this problem immediately. They might only discover it later when checking their call logs. In some cases, older calls might appear in notifications, but new incoming calls would still not be shown there.

READ MORE: iPhone Not Receiving Calls? Explained & Resolved ➜

Why are You Missing Your Call Notifications?

Users who have reported this issue on online forums have pointed out different reasons for the error occurring. However, some common ones include:

1. Silenced notifications: Your phone app’s notifications may’ve been manually silenced to avoid any call notifications.
2. Low volume: Your phone’s volume might’ve been reduced, which means you won’t hear or know about any potential incoming calls.
3. Do Not Disturb: The Do Not Disturb mode may be blocking notifications, including those from the Phone app.
4. App icon badges: Missed call indicators might be disabled on the Phone app icon.
5. Software bug: The mobile operating system may be experiencing a glitch or a bug, preventing any sorts of alerts for incoming calls.
6. Network issue: Your network carrier and connectivity problems might prevent your phone from receiving notification data.

READ MORE: [FIX] Why Won’t My Call Go Through to a Certain Number? ➜

How to Fix Missed Call Notification Not Showing?

Here are some of the steps you can take to isolate the issue and potentially prevent missed call notifications not showing up on your device.

1. Adjust the Ring Volume Settings

If you don’t hear your phone ringing for incoming calls, it’s likely that the ringer volume is silenced. Even though you might increase the volume using the buttons, that might not adjust the ringer specifically.

Here’s how to adjust the ring volume on your device:

1. Tap or hold either of the physical volume buttons on your device.
2. A volume slider will appear, often with a menu button on the top or bottom. Tap this menu button.
3. A menu will appear with separate sliders for different volumes, including one for your phone’s ringer. Slide the ringer volume slider all the way to the desired level, one that’s loud enough for you to hear.

READ MORE: How to Disable Absolute Bluetooth Volume in Android ➜

2. Check if You’re Within Network Range

While extremely rare, there can be situations where you might not receive a cellular signal, especially when traveling or in a region experiencing a widespread outage. In these cases, if someone calls you, you’ll only be notified when your phone next catches the network signal.

3. Check if Do Not Disturb or Airplane Mode is Enabled

Your second plan of action should be to look at functionality that might be deliberately preventing incoming call notifications. For this, you’ll need to check if Do Not Disturb (DND) or Airplane mode is enabled. DND essentially silences all incoming notifications and vibrations, including calls and text messages. Airplane mode disables all types of cellular and wireless signals from your phone.

Step 1: Disable Do Not Disturb Mode

Here’s how you can locate the Do Not Disturb settings and disable it (if enabled):

1. Go to your phone’s Settings.
2. Find “Notifications” and tap on it.
3. Scroll down to find “Do Not Disturb,” and tap on it.
4. If enabled, tap “Turn off now.”

Step 2: Disable Airplane Mode

Here’s how you can locate the Airplane mode settings and disable it (if enabled):

1. Go to your phone’s Settings.
2. Find “Network & internet,” and tap on it.
3. Look for “Airplane mode,” and tap the toggle slider once to disable the setting (if enabled)

READ MORE: How to Use Do Not Disturb on iPhone [All iOS Versions] ➜

Method 4: Check if Phone App Notifications are Disabled

If there’s nothing wrong with your phone’s sound settings, chances are that notifications for the Phone app itself might be silenced. Here’s how to check the Phone notifications:

1. Open your phone’s Settings.
2. Locate and tap “Apps.”
3. Select “See all apps.”
4. Find your default calling app, which is usually labeled “Phone” on most Android phones.

   

5. Tap the app icon, then select “Notifications.”
6. Check if the toggle for “Incoming calls” is enabled.

   

Method 5: Turn off Caller ID and Spam Protection

The Google Phone app has a feature called “Caller ID & spam,” which blocks any incoming call notifications that it deems is likely to be spam or from an unknown number. Sometimes, it can mistake legit numbers and calls from reaching through to you.

Here’s how you can disable Spam Protection within the Google Phone app:

1. Open the Phone app.
2. Tap on the three vertical dots on the top right-hand side.
3. In the drop-down menu, tap “Settings.”

   

4. Tap on “Caller ID & spam.”
5. On the screen that pops up, disable the toggle in front of “Caller ID & spam.”

   

READ MORE: How to Hide or Change Your Caller ID on iPhone in 3 Steps ➜

Method 6: Reset App Preferences

If your calls aren’t ringing or showing up, a bug or glitch in your default calling app could be the culprit. This app is usually Google Phone, but some users might have a third-party option like Truecaller or Hiya. To troubleshoot, you can reset your app preferences. This will clear any default app settings, allowing you to choose a different calling app next time. This can help isolate the issue if it’s related to the caller app itself.

Here’s how you reset preferences for the default calling app:

1. Go to your phone’s Settings.
2. Tap on Apps > See all apps.

   

3. On the top right-hand side of the screen, tap on the kebab (three vertical dot) menu icon.
4. Choose “Reset app preferences.”

   

Method 7: Restart Your Device

The problem could also come from a more complex issue, like a bug or glitch within the operating system itself. These can be trickier to solve. However, it’s always wise to start with simple solutions, like restarting your device.

In most cases, a restart can refresh your system’s OS and clear any bugs or glitches that might be interfering with calls. It’s also worth noting that some devices may turn off unimportant notifications, including calls, when entering a power-saving state on low battery. In these cases, it is possible that your phone might not automatically switch back to the normal state after charging above a certain level.

READ MORE: 7 Ways to Turn Off Your iPhone or Android (Even if its Stuck) ➜

Method 8: Disconnect All Bluetooth Devices

If you’re receiving a call and see the contact information on the screen alongside a visual prompt, but aren’t hearing an audio cue, it is possible that you have some Bluetooth devices connected to your phone that are sounding the ringtone.

In these cases, your ringtone and other system sounds with be routed to the paired Bluetooth device. When you disable or unpair a Bluetooth connection, the phone will be forced to ring the incoming call via the internal speaker itself.

Here’s how you can disconnect all Bluetooth devices from your phone:

1. Go to your phone’s Settings.
2. Select Connected devices > Connection preferences > Bluetooth.

   

3. Uncheck the toggle in front of “Use Bluetooth.”

   

Method 9: Contact Your Network Carrier

There are often situations where a caller tries to reach you, but you don’t receive the call despite having no apparent issues on your end. This can sometimes be caused by a network error on your carrier’s side. In this case, it’s advisable to contact your network carrier first and inquire about the problem.

Method 10: Update Your Phone’s OS

If you’ve recently updated your device and have started facing this issue, there is a big chance that there is a problem with the new update that was pushed in by the manufacturer. In such cases, if the developer receives a huge number of complaints, a bug fix would soon be pushed out. This is why you should try to constantly check for updates and update you phone as soon as a new version is available.

Here’s how you can update your phone’s OS:

1. Go to your phone’s Settings.
2. Tap on System > System updates.
3. If an update is available, tap on “Update.”

   

READ MORE: How to update graphics driver in Windows? (AMD, Nvidia, Intel) ➜

Method 11: Factory Reset Your Device

If everything you tried didn’t work, try and isolate if the issue is indeed on the software end. For that, you will need to factory reset your device. Keep in mind that this will remove all data on your phone, so backup important files beforehand. For most users, factory resetting their phones seemed to do the trick and solve the issue.

Method 12: Look for Any Physical Damage

If you’ve already tried all of the methods above and it didn’t solve the issue, look for any physical marks of wear and tear on your device. There is a chance that your speaker is the fault point if you’re not hearing any ringtone while receiving a call.

READ MORE: 10 Ways to Fix Your Xiaomi Phone Flickering Issue [2024] ➜

What to Do if All Else Fails?

If you’re having trouble isolating the cause of the incoming call issue but still want to use your device normally, here’s a workaround.

If you hear a ringing sound but don’t see a notification or any indication of an incoming call, try pulling down the notification shade. This is where you’ll usually find the option to accept or decline the call, along with the caller’s name.

On the other hand, if your ringtone doesn’t play when you see an incoming call, the problem might be with your phone’s hardware or a software bug. The troubleshooting steps above should have helped identify a software issue, so hardware problems are more likely in this scenario.

READ MORE: How to Contact Snapchat Support in 2024 [4 Different Ways] ➜

Conclusion

The reasons for why your phone isn’t notifying you of incoming calls can vary depending on the circumstances. It could be something simple, like Airplane mode being enabled, or something more complex, like a faulty phone speaker. In any case, you should try to go through the guide step-by-step to ensure that the issue is isolated, and consequently, implement a corresponding solution.

The post 12 Easy Fixes for Missed Call Notification Not Showing [2024] appeared first on Appuals.

It would display the prompt “Enter Password to Unlock 30/30 Attempts Remaining,” which was more of an error than a security feature. This guide will try and break down the entire procedure for bypassing this prompt and will discuss how to prevent it from appearing every time you boot up your device.

What is the “Enter Password to Unlock 30/30 Attempts Remaining” Error Message?

This security error message, ‘Enter Password to Unlock 30/30 Attempts Remaining,’ is actually a feature of LG’s Secure Startup. It gives users with 30 attempts to enter the correct password. However, if all attempts are exhausted, the device will be permanently locked out and will have to reset to factory settings. This reset will erase all data stored on the phone.

In LG phones, the Secure Startup state is initiated before the phone loads the Android operating system. This is why it can sometimes be difficult to access your data remotely if you’re locked out in this state.

According to most people who have posted about a similar issue on online forums, the phone usually does not prompt them to enable Secure Startup when setting up a new phone. In most cases, most of the PIN codes, including the device lock, do not work to unlock the phone.

READ MORE: Is Unlocked Bootloader Needed to Flash Stock Firmware on LG? ➜

Why Does This Error Occur?

LG hasn’t provided a reasonable statement regarding why this issue occurs, and since they’ve shut down their mobile division, the option to contact LG Support also isn’t available. But, since this is essentially meant to be a security feature, here’s why it may be happening:

1. Data Security: This message, which prompts you to enter your Secure Startup PIN, appears during each boot cycle to ensure that your data remains safe from unauthorised access.
2. Factory Reset Protection: Since the normal Android lock can be bypassed via factory resetting the phone, this message, and the Secure Startup state in particular, act as a barrier in between, essentially forcing the user to enter the correct PIN.
3. Buying from the Used Market: If you are the second owner of your device, there’s a possibility that the previous owner enabled Secure Startup. This is why your set PIN code for the lock screen may not unlock the Secure Startup state.
4. Old LG Device: Some of LG’s older models came with full-disk encryption enabled by default, which cannot be disabled. Newer phones running Android 10 and above do not support this type of encryption.

READ MORE: How to Fix LG IMS keeps stopping with “LG IMS has stopped” error ➜

How to Solve this Error?

While this issue isn’t exactly an error message, there can be instances where the user may experience a consistent loop where none of the attempts seem to be working. In that case, there are a few workarounds or certain procedures that you could follow along to fix the issue, potentially.

Method 1: Contact the Previous Owner (Second-Hand Devices)

From across multiple online forums and LG’s responses over the years, we’ve discovered that the Secure State is almost always a setting that must be manually enabled and that the security pop-up cycle is not a bug. Therefore, it’s important to note that either you or someone else should have set the Secure Startup PIN.

If you’ve recently purchased a phone and encounter this issue, your first course of action should always be to contact the original owner and inquire about the relevant details. It’s also possible that the device you purchased still contains the PIN that the previous owner, or one of the previous owners, forgot to remove before selling it to you.

Method 2: Contact Your SIM Carrier (Carrier Locked Phones)

If you have a carrier-locked device or a new phone, and are then encountering this issue, it’s best to contact your cellular service provider’s support and inquire about the problem.

Many people in online communities have reported fixing their issues this way. Keep in mind that before taking any drastic measures like resetting your phone to factory settings, your first priority should be to resolve the issue directly. As mentioned below, factory resetting is not always a permanent fix and should only be used as a last resort.

READ MORE: How to See Facebook Password Without Changing [2024] ➜

Method 3: Factory Reset Your Device (Remove Secure Startup)

If all else fails, your only option is to factory reset your device. However, if you do have important data on your phone, it’s best to contact a data recovery specialist instead of proceeding any further. Keep in mind that this method may not work for all models of LG devices.

Step 1: Reset Your Device to Factory Settings

To reset your phone to stock factory settings,

1. Power off your device. You can do this by long-pressing the Power button and tapping “Power off.”
2. Press and hold the Power + Volume Down buttons (until you see the phone’s logo) to enter the system recovery.
3. From the menu, choose “Factory data reset.” You may need to use the physical buttons on the phone to navigate around the UI.
4. When prompted to delete all user data, choose “Yes.”
5. Choose “Yes” again to confirm.

Step 2: Bypass FRP Lock

Once your phone has been reset, you still would need a specific PIN (or an associated Google account) to activate the device. However, if you don’t have either of those, there is a workaround that involves bypassing the Factory Reset Protection (FRP) lock. Here’s how you do it:

1. Connect to a Wi-Fi network during the initial startup.
2. On the “Verify Password” screen, choose “Use My Google Account Instead.”

   

3. When prompted to enter your email, select the “Change Keyboard” button located at the bottom right corner.
4. On the “Manage keyboards” screen, long-press the Gboard toggle.

   

5. In Settings, tap the three vertical dots in the top right corner.
6. From the drop-down menu, select “Help & feedback.”

   

7. Tap on “Delete or disable apps on Android.“
8. Tap on the hyperlinked text: “Tap to go to Application Settings.” This will take you to the App info section of the Settings.

   

Step 3: Turn off Secure Startup via System Settings

Once you enter the device’s Settings page, you have complete freedom to change system settings as you wish. However, keep in mind that since you haven’t set a screen lock yet, any changes you make here will be reflected across the entire operating system.

1. In the App info section, select “Settings.”
2. On the “Settings” app settings, choose “Open.”

   

3. Select “Fingerprints,” and then tap “Next.”
4. On the screen prompting you to set a screen lock, choose “PIN.
5. A prompt for “Secure start-up” might appear, asking if you want to require a PIN every time your phone reboots. Tap “No, thanks.”

   

6. Tap “Next” and then set up a PIN.

Step 4: Return to the Set-up Process

Once you’ve removed the Secure Startup option to appear every time you turn on your phone, head back to the startup process continuously tapping the “Back” button in the navigation bar.

1. Head back to the set-up process.
2. Continue with setting up the phone normally, like you would.
3. Your phone will now not ask for a Secure Startup PIN when you boot up your device.

Your Google Account “Can’t” Pull You Out of the Secure Startup State!

Most publications reporting on this issue have claimed that your Google account, specifically the Find My Phone feature, is capable of changing this PIN. However, this isn’t true.

The Secure Startup state is initialised even before the Android operating system, meaning the OS itself can’t intervene in the verification process. Plus, your Google account is only bound to work within Android itself.

You can however choose to factory reset your phone since you do have access to internet and can dial emergency calls, but if you’ve decided to wipe all data off, it’s better to do it the physical way.

READ MORE: What to do Before Resetting Your Android Phone? [2024] ➜

Why is Removing the Secure Startup Important?

If you’ve decided to factory reset your phone, keep in mind that this security error message won’t automatically go away. The next time you start your phone, you’ll be fine for the initial setup, but after that, you’ll be greeted with the same security message each time.

To break out of this cycle, you’ll need to disable Secure Startup completely which is essentially the only way to make sure your phone is usable again. Otherwise, it’s like factory resetting your phone every time you restart the device. If you’ve inherited or purchased the phone from someone, you’ll need to contact the person in question since changing or removing this lock requires you to remember the old one.

In some cases, the system may use a basic password stored in memory to boot the operating system initially. This bypasses the Secure Startup state and allows the first boot.

READ MORE: 8 Methods to Recover Your Android Lock Screen Password/PIN ➜

How to Disable Secure Startup?

It is important to understand that disabling Secure Startup will require you to factory reset your device if you don’t already know the Secure Startup PIN. Plus, doing so also removes an important layer of security from your device. It’s strongly recommended to keep it enabled unless you are stuck in a cycle where you can’t remember the PIN, or feel like the feature might be unnecessary for your use.

1. Factory Reset: To disable Secure Startup, you’ll need to first perform a factory reset on your phone. This will erase all data in your phone.
2. Set a New Lock Screen Password: Once you have access to the Android OS after the reset, go to Settings > Security > Screen lock. Choose and set a strong lock type for your Android lock screen.
3. Disable Secure Startup: In the Security settings, tap on the option for Secure Startup. Look for the setting labeled “Require PIN to start device” and select “No thanks“.
4. Reboot Your Device: This will disable Secure Startup, allowing your device to boot up without entering a PIN during startup.

This will disable Secure Startup. Your device will now boot up without entering a Secure Startup PIN since it will use the existing lock screen password stored in memory to load the Android operating system.

READ MORE: How to See Wi-Fi Password on Android – All Versions Guide ➜

Conclusion

The Secure Startup can be a nuisance to deal with, especially if it consistently bugs you, locking you out of your device without prompting you to set a new PIN. For most people, this issue can often escalate to the point where they are permanently locked out of their devices with important data still on the phone. This is considering that if you don’t know the correct PIN, your only way out is a factory reset.

The post FIX: “Enter Password to Unlock 30/30 Attempts Remaining” appeared first on Appuals.

In this article, we will discuss methods to resolve this issue.

Quick Fixes:

• Switch to a Different Internet: You can switch your internet to Mobile Data or another WiFi network to verify whether this is the source of your issue.
• Use a Web Browser: There’s a chance that the Google Pay app has errors or is malfunctioning, leading to the issue. Hence, we suggest making payments through a web browser. You can use Microsoft Edge, Google Chrome, or any other browser to make payments using Google Pay.
• Try a Different Payment Method: There might be an issue with your current payment method, such as an expired or depleted source of funds, which could be causing the problem. Try adding a different payment method through your Google Pay account.

1. Clear Google Play Store’s Cache

The problem might occur from temporary glitches and cached data in the Play Store, which can be resolved by clearing the Google Play Store’s cache, where payment methods are managed.

1. Press and hold the Google Play Store icon, then click on the App info option.
   
2. Head to Storage.
   
3. Tap on Clear Cache.
   
4. Make another attempt

2. Remove the Payment Profile

You might not be able to make purchases because Google has blocked or issues with your current payment profile. In such cases, you can delete your current payment profile and create a new one.

1. Visit Google Pay settings.
2. Scroll downward to Payment Profile Status and click on Close Payment Profile.
   
3. Follow the prompts and re-add your card to create a new profile.

If none of the solutions work, reach out to support and describe your issue to them. They may be able to provide a resolution to your problem.

To get in touch with support, click here.

The post How to Fix Error OR_PMCR_32 on Google Pay? appeared first on Appuals.

Despite the watch’s advanced capabilities in other areas, such as workout tracking and heart rate monitoring, this specific problem persists for many. This guide identifies common challenges users report, explores possible causes for this Samsung Galaxy Watch not recording sleep issues, and provides effective solutions to address them.

How does the Samsung Galaxy Watch track your sleep?

The Samsung Galaxy Watch uses sensors and algorithms to monitor sleep patterns. It tracks your movement through an accelerometer and analyzes your heart rate variability using a heart rate sensor to determine sleep stages, including light, deep, and REM sleep. The watch’s software processes this data to provide insights into sleep duration, quality, and consistency.

By wearing the watch overnight, it gathers and compiles this information, presenting it in the Samsung Health app, where you can view detailed reports and trends over time. This technology aims to help users better understand their sleep habits and make informed decisions to improve their sleep health.

READ MORE: Samsung Only Uses $3 Worth of Titanium in the S24 Ultra ➜

What exactly is the problem, and what are its causes?

Many users of the Samsung Galaxy Watch have reported a specific issue where the watch fails to track or record sleep data accurately. This problem manifests as missing records for nights of sleep or incorrect data showing significantly disturbed or minimal sleep when the user’s actual sleep experience is different.

Here are some possible causes of this problem with your watch:

• Software glitches: Bugs in new updates or inherent software issues that disrupt sleep-tracking algorithms.
• Sensor malfunctions: Faulty or blocked sensors that fail to read heart rate or movement data during sleep correctly.
• Improper fit: If the watch is too loose or tight, it might not be in the correct position to monitor physiological signals effectively.
• Outdated firmware: Running on older firmware versions can lead to compatibility issues with newer versions of the Samsung Health app, affecting how data is processed and displayed.
• Interference from other devices: Sometimes, other electronic devices nearby can interfere with the signal transmission of the watch, leading to inaccurate readings.
• Physical barriers: The buildup of dirt or sweat on the sensors can obstruct the accurate reading of body signs necessary for sleep tracking.

READ MORE: Will a Smartwatch Ever Replace a Traditional Timepiece ➜

How to fix Samsung Galaxy Watch not recording sleep issue?

Experiencing issues with your Samsung Galaxy Watch not recording sleep accurately can be frustrating. Fortunately, you can potentially take several troubleshooting steps to resolve this problem. Here’s how you can get started:

1. Cleaning the sensor area

Keeping the sensor area clean is essential to ensure that your Samsung Galaxy Watch’s sensors are reading accurately. Dirt, grease, and sweat can interfere with sensor functionality, so regularly wipe the back of your watch with a microfiber or lint-free cloth.

For more stubborn residues, a small amount of water or rubbing alcohol can help clean the area. Avoid harsh cleaning agents like hand sanitizers, soap, or abrasive materials, which could damage the sensors.

2. Ensure proper fit for accurate tracking

The fit of your watch is crucial for precise sleep tracking. Ensure the watch is worn comfortably against your skin, about an inch above your wrist bone, to maintain optimal contact with the sensors. If you often move in your sleep, consider switching to a flexible fabric band at night to minimize gaps between your skin and the watch.

Additionally, wearing the watch on the inside of your wrist or arm can improve sensor accuracy, especially if you have tattoos or dense body hair.

READ MORE: How to Pair Your Smartwatch with Android Phone ➜

3. Restart your watch

Restarting your Samsung Galaxy Watch can resolve potential glitches that might have occurred due to recent updates to the device or the Samsung Health app. This simple step can often clear minor software issues that are affecting functionality. Here’s how to do it:

1. Press the Power Key and Home Key simultaneously on your Galaxy Watch until the power menu is displayed.
   

   

2. Tap the “Power icon” on the screen to turn off the watch.
   

   

3. Once the watch has completely powered down, to turn it on, press and hold the Power button again until you see Samsung logo appear.
   

   

Images sourced from WorldofTech

4. Ensure app permissions for sensor data

For Samsung Health to function properly and track your sleep accurately, it must have full access to the device’s sensors. This access allows the app to monitor your movements and physiological signals, crucial for sleep analysis. Here are the steps to enable sensor permissions:

1. Swipe up to bring the Apps and open the Settings on your watch.
   

   

2. Scroll down and select “Privacy.”
   

   

3. Tap on “Permission Manager.”
   

   

4. Scroll and tap on “Sensors.”
   

   

5. Find and select “Samsung Health” in the list.
   

   

6. Tap the option for “Allow” to ensure Samsung Health can always access sensor data.
   

   

Images sourced from HP Bagus

READ MORE: Can You Use An Apple Watch on Android? ➜

5. Check Samsung Health settings

Certain features within the Samsung Health app should be enabled to get the most out of your sleep tracking. This includes monitoring blood oxygen levels and detecting snoring, which helps the app to more accurately determine your sleep stages based on physiological changes during sleep. Here’s what you need to do:

1. Swipe down from your watch face and tap on the Settings icon.
   

   

2. Scroll to and tap the Samsung Health app.
   

   

3. Select “Heart rate.”
   

   

4. Set it to “Measure continuously.”
   

   

5. Get back to the previous menu and scroll down. Tap the toggle next to “Blood oxygen during sleep.” This setting helps measure sleep quality more accurately by monitoring blood oxygen levels.
   

   

Images sourced from Got to Get it Done

6. Enable Sleep Mode

Enabling Sleep Mode, Bedtime, or Goodnight Mode on your Galaxy Watch can significantly enhance sleep recording. This mode minimizes disruptions during your sleep by turning off wake-up gestures and reducing notification alerts, thereby allowing for a more stable measurement period. Follow these steps to enable Sleep Mode:

1. Access the app drawer by swiping up on the watch face. Select the Settings app from the list of applications.
   

   

2. Scroll down and tap on “Modes.”
   

   

3. Choose “Sleep” from the available options.
   

   

4. Activate Sleep mode immediately by selecting “Turn on,” or set a schedule to activate automatically at your preferred sleep time.
   

   

Images sourced from WebPro Education

READ MORE: How to Enable & Use Sleep Mode on Your iPhone ➜

7. Clear Samsung Health cache

Clearing the cache for the Samsung Health app can help fix issues related to outdated or corrupt temporary data that might be hindering sleep recording. Here’s how to clear the cache:

1. Swipe up from the bottom of your watch face to access the app drawer and tap on the Settings app.
   

   

2. Scroll down and select “Apps.”
   

   

3. Choose the “App list.”
   

   

4. Scroll down and tap on Samsung Health app. 
   

   

5. Select the option to clear the cache.

Images sourced from WebPro Education

Repeat the process for the Samsung Health app to ensure all associated caches are cleared.

8. Update the Samsung Health app and Watch software

Keeping your apps and watch firmware up to date is crucial for ensuring all features work correctly, including sleep recording. Here’s how to update both your Samsung Health app and the watch’s operating system:

Updating the app

1. Access the app drawer by swiping up on the watch face and tap on the “Google Play Store” icon.

   

2. Scroll down and select “Manage apps.“
   

   

3. Tap “Update all” to ensure all apps, including Samsung Health, are up-to-date.
   

   

   Restart your watch after the updates to apply any changes.

Updating the Watch software

1. Again, swipe up to access the app drawer and tap on Settings.
   

   

2. Scroll down and open “Software Update.”
   

   

3. Here, select  Install Now.”
   

   

4. Ensure your watch is connected to Wi-Fi, has the location turned on, and is connected to the charger. Wait for the update to download and install, which might include a status like “Processing the update package…“
   

   

5. Once updated is complete, tap “OK.”
   

   

Restart your watch after installing the app and system updates to refresh the system and apply the new configurations effectively.

Images sourced from Fix369

READ MORE: How to Find Your Lost or Stolen Apple Watch Easily [2024] ➜

9. Factory Reset your watch

If you’ve tried other fixes and your Samsung Galaxy Watch still isn’t recording sleep, a factory reset might help. This process will erase all data on your watch, including settings, apps, and personal data, so it’s important to back up your information first. Here are two ways to reset your Samsung Galaxy Watch:

Reset your watch from Settings

1. Swipe up from the bottom of the watch face to open the app drawer. Tap on the Settings to open it.

   

2. Scroll down and select “General.”
   

   

3. Tap on “Reset.”
   

   

4. Read the instructions and then tap “Reset” again to confirm.
   

   

Images sourced from: WebPro Education

Reset via Recovery mode (Reboot mode)

If you’ve forgotten your screen lock PIN and need to reset your watch, you can perform a recovery reset. Please note that after the reset, you’ll need to log in using the same Samsung account that’s currently configured on the watch. Here are steps to reset your watch through recovery mode:

1. Turn off your watch by pressing and holding the Home key (Power key) and the Back key simultaneously until you see “Rebooting” at the bottom of the screen.
   

   

2. As soon as the “Rebooting” message appears, press the Home key repeatedly until the Reboot mode menu appears on the screen.
   

   

3. Use the Home key to cycle through the options until “Recovery” is highlighted.
   

   

4. Press and hold the Home key to begin the recovery process. Older models will automatically start the recovery.
   

   

5. After initiating recovery, a menu on Galaxy watches running Wear OS (such as Watch4, Watch5, and Watch6) will appear. Swipe down to select “Wipe data/factory reset,” then swipe right.
   

   

6. Swipe down again to choose “Factory data reset,” and swipe right to execute the reset.
   

   

7. Once the reset is completed, swipe right to reboot the watch.
   

   

Images sourced from: WorldofTech

After the reset, set up your watch again and check if sleep recording is working. This step often resolves underlying issues by restoring the watch to its original settings.

10. Seeking Further Assistance

If the factory reset also does not resolve the issue, the next step would be to contact Samsung Support or visit a Samsung help center for professional assistance. They can provide further diagnostics and identify hardware issues affecting the sleep tracking functionality.

READ MORE: How to Contact Snapchat Support in 2024 [4 Different Ways] ➜

Maximizing the sleep recording feature on your Samsung Galaxy Watch

Using the sleep recording feature effectively on your Samsung Galaxy Watch can provide valuable insights into your sleep patterns and help you adjust for better sleep health. Here are some tips on how to optimize the use of this feature:

• Proper wear: Ensure the watch is snug against your skin, about an inch above the wrist bone, for optimal sensor contact.
• Battery management: Keep the watch charged to prevent it from turning off at night.
• Software updates: Regularly update your watch to improve sleep tracking accuracy.
• Use sleep features: Activate ” Do Not Disturb” mode and enable blood oxygen monitoring and snore detection for detailed sleep insights.
• Analyze sleep data: Regularly review your sleep data in the Samsung Health app to understand your sleep patterns and make necessary adjustments.
• Consistent sleep schedule: Maintain a regular sleep routine to enhance the reliability of your sleep data.

READ MORE: Samsung Smart Ring Could Challenge Galaxy Watch’s Dominance ➜

Final thoughts

Tackling sleep recording issues with your Samsung Galaxy Watch can be straightforward with the proper steps. You can try several troubleshooting methods, including updating software, cleaning the sensor area, and adjusting how you wear the watch.

Regular maintenance, like software updates and keeping the watch clean, will help prevent many problems. If issues persist after trying these solutions, a factory reset might be necessary, and for ongoing problems, contacting Samsung Support is recommended.

The post 10 Fixes For Samsung Galaxy Watch Not Recording Sleep appeared first on Appuals.

However, in some cases, this audible cue may be unnecessary, so you may want to turn it off. This guide will go over the procedure for turning off the startup boot sound on your phone running HyperOS.

How Startup Sounds Work in HyperOS

HyperOS is Xiaomi’s rebrand of its older Android-based operating system, MIUI. The update, which was announced in 2023, brought with it a number of performance and feature changes.

Although the surface-level workings are, more or less, the same, the underlying system has undergone quite a bit of a makeover. As part of that overhaul, Xiaomi introduced a completely new boot animation for HyperOS. However, at the same time, they also removed the option for disabling startup sounds, which was previously available to users running MIUI.

Why Turn Off the Startup Sound?

For any phone, including those running HyperOS, the startup sound essentially indicates that the device is booting up its operating system. While it’s been typically a part of the smartphone experience for a long time, users have recently begun to prefer turning this sound off. This is because it can be repetitively annoying and, at times, even redundant since the boot animation itself serves the same purpose.

READ MORE: How to Unlock Bootloader on HyperOS Devices in 7 Easy Steps ➜

How to Turn Off HyperOS Startup Sound?

On HyperOS, there is no direct option or setting to turn off the startup sound. However, there are other methods to do so, which are explained in detail below.

Method 1: Put Your Phone to Silent Mode Before Powering Off

The only way to silence the startup sound on your HyperOS device is to essentially turn off all audio notifications and ringtone volume before powering off or restarting your phone. This will automatically mute the sound on startup as well and the boot audio won’t be heard.

To do this, you can either hold the Volume Down button (while the device is on) until the slider reaches its lowest point. Alternatively, you could also swipe down to the Control Center, where you’ll find the volume slider. Use it to turn the volume all the way down.

Method 2: Use Silent Boot to Automatically Toggle Silent Mode

The first method essentially requires you to first manually put your phone into silent mode and then power off your device. Once you turn it back on, you will then need to manually turn the volume up again to hear any alerts, messages, notifications, or incoming calls.

To bypass this issue, an app on the Play Store called “Silent Boot” automates this process. It works by toggling on Do Not Disturb mode when you prompt your phone to switch off or restart. When the phone boots back up, the app automatically turns off Do Not Disturb mode.

READ MORE: How to Install HyperOS Moon Super Wallpaper on Any Android ➜

MIUI vs HyperOS

In MIUI, users had the option to manually switch off the startup sound if they wanted to. To do this, you simply needed to:

1. Open the Settings app.
2. Find “Sound & Vibration,” and tap on it.
3. Tap on “Additional settings,” or “More settings.“
4. Look for “Play audio at startup,” and turn the toggle off.

However, in HyperOS, Xiaomi decided to remove this setting altogether, possibly because they didn’t find the feature, or specifically the setting itself, useful. It also makes sense in that if a user doesn’t want any sound to disturb their surroundings, they would simply mute the audio to prevent any sound, not just the boot sound, from playing.

On the other hand, there may be cases where specifically the boot sound is perceived as annoying or irritating to the user, and they themselves want to isolate the sound and turn it off. Unfortunately, that option is not yet available in HyperOS.

READ MORE: How to Install Mi Dialer in HyperOS in 6 Easy Steps ➜

Conclusion

While the option for disabling startup audio has been removed from HyperOS Settings, you can still mute these sounds by switching your phone to silent mode before turning it off. This will make sure that your phone doesn’t ring or vibrate the next time it is powered on.

The post How to Turn Off HyperOS Startup Sound [2 Easy Methods] appeared first on Appuals.

Common causes for this error include incorrect or outdated payment information, an expired credit card, or insufficient funds. However, other factors, such as high traffic on Ticketmaster during major ticket releases, or problems with browser compatibility and outdated software, may also contribute.

Before proceeding with the solutions, ensure that the Ticketmaster server is up and running without any issues. If the server is down, you will not be able to resolve the error despite following the solutions provided. For server status, visit downdetector.com/status/ticketmaster. You can view any server issues there.

Quick Fixes

• Refresh the Page: Begin with the simplest fix by refreshing your Ticketmaster page, as this can sometimes clear temporary errors.
• Restart Your Device: Rebooting your computer or smartphone can resolve underlying issues affecting the Ticketmaster service.
• Use Incognito Mode: Open a private or incognito window in your browser to avoid interference from extensions and cached data.
• Check Card Details: Double-check your entered payment information for any mistakes before resubmitting.
• Ensure Account Details Are Current: Verify that your Ticketmaster account information, especially your billing address, is up to date.
• Utilize a Saved Payment Method: Use a payment method previously saved to your Ticketmaster account as it’s likely to have been verified.
• Limit Open Tabs: Close any unnecessary browser tabs that may be using resources and potentially interfering with Ticketmaster’s payment process.
• Disable VPN Services: If you are using a VPN, try disabling it, as sometimes VPNs can trigger security flags on transaction sites.
• Confirm Transaction Not Blocked: Sometimes banks automatically block certain online transactions. Verify with your bank that the transaction is not being stopped on their end.
• Try Another Payment Method: If possible, attempt your purchase with an alternative payment method, such as another credit/debit card or PayPal.

1. Clear Cache and Cookies

1. Navigate to your Browser Settings by clicking the three dots in the top right corner.
   
2. From the left sidebar, select Privacy and Security, then click on Site Settings.
   
3. Select View permissions and data stored across sites.
   
4. Search for Ticketmaster.com, click the Delete icon, then confirm by clicking Delete again.
   
5. After completing these steps, check to see if the ticket booking process works without any issues.

2. Use a Different Browser

Consider using a different browser, such as Firefox or Microsoft Edge, to determine whether the problem is browser-specific. A different browser may allow you to avoid the error entirely. For recommendations on the best browsers, visit 7 Best Web Browsers.

3. Contact Ticketmaster Support

If none of the solutions work, your next step is to contact Ticketmaster Support for assistance with your issue. Go to the Ticketmaster support page, fill out the support request form, and wait for a response from the team, which should arrive within 24 hours.

If you suspect the issue is on your bank’s end (such as a block on e-commerce transactions), reach out to your bank for assistance. They can ensure your account is set up for online purchases and address any fraud concerns that may be blocking the transaction.

The post How to Fix Ticketmaster Error Code U533 When Booking Tickets? appeared first on Appuals.

This guide will walk you through the process of flashing TWRP onto your Xiaomi phone. We’ll look at some of the benefits of doing so, as well as the slight differences in the flashing procedure depending on whether you’re running MIUI or HyperOS.

What is TWRP?

The TeamWin Recovery Project, commonly known as TWRP, is a touch-based GUI custom recovery. It allows users to install custom firmware or ROMs, back up existing data, or perform a complete phone wipe, resetting it.

While every phone comes with its own OEM recovery software, which provides basic functionality, TWRP gives unrestricted access to install or update system files that would otherwise be restricted. It was initially developed for Nexus phones, but has since gained immense popularity and has been ported to other devices.

READ MORE: How to DIY Port TWRP for Android ➜

How to Flash TWRP in Xiaomi Devices?

The process of flashing TWRP on Xiaomi devices is fairly straightforward given that you’ve checked off all of the prerequisites required to install a custom recovery in your phone.

 Pre-Requisites

Before installing TWRP onto your device, you need to make sure you have the following sorted. You will need:

1. A phone with an unlocked bootloader.
2. A PC with ADB drivers installed.
3. A USB cable for connecting your phone to the PC.
4. An active internet connection for downloading TWRP files.

It is important that each requirement listed above is fulfilled. For instance, if your Xiaomi phone has a locked bootloader, you will need to unlock it first. We have a detailed guide that you can follow along to unlock your device’s bootloader.

Before starting to flash TWRP, it is also recommended to backup all of your existing data since it may be wiped off completely. Also, try to install ADB drivers in your PC first before proceeding along with this guide.

READ MORE: How to Unlock Bootloader on Xiaomi HyperOS Devices ➜

Step 1: Setting Up Platform Tools

To install TWRP on your phone, we’ll use the Android Debug Bridge (ADB) to flash the recovery image file. If you’re unfamiliar with ADB, it’s a tool that lets you communicate with and control your Android device from your computer.

ADB Platform Tools in particular, is a suite of different programs that provides a command-line interface, either via Command Prompt on Windows or Terminal on Mac, for interacting with your device via ADB or Fastboot. To set this up, follow the steps down below:

1. Download the SDK Platform Tools by Google.
2. Extract the downloaded .zip file.

   

3. You’ll find a folder named “platform-tools.” Within that folder, tap on the address bar, and type in ‘cmd.’ This will open up Command Prompt.

   

4. If you are on Mac, open the Terminal and head to the directory using the command “cd [file directory].”

   

5. This Command Prompt (Windows) or Terminal (macOS) window will be used to push the ADB commands for flashing TWRP.

Step 2: Enabling Developer Options

The next step is to enable USB debugging and that involves unlocking any restrictions (Developer options) that might prevent communication with an external device. This is important not only for this process, but also because it allows you to flash a fresh version of the OS via Fastboot in case of a software brick where the device won’t boot normally after flashing TWRP.

To enable USB Debugging, follow the steps below:

1. Go to Settings and tap on “About Phone.”
2. Look for the “OS version,” and tap on it several times till you see the message: “You are now a developer.”Enabling “Developer options” in HyperOS
3. Head back to Settings and scroll down to find “Additional settings.” Tap on this.
4. Scroll down to “Developer options,” and tap on it.
5. Look for “USB debugging,” and turn the toggle on.Enabling “USB debugging” in HyperOS
6. In the confirmation dialog that pops up, tap “OK.The (HyperOS) precautionary dialog box

READ MORE: Android Developer Options Complete List (Explained) ➜

Step 3: Check your Phone’s Partition Scheme

Once all the necessary prerequisites are fulfilled, the next step is to check what sort of partition scheme your phone uses. There are two main types of these partitions — A/B and A-only. On the surface, note that non-A/B devices need only flash TWRP once, while the other set of devices must first boot into TWRP and then install the recovery from within the recovery itself.

A/B and Non-A/B (A-Only) Partitions

For devices that support A/B partitions or “Seamless Updates,” it works in a way that the operating system resides in one slot while any new update that needs to be installed does so in the other (inactive) slot. Once the update is successfully installed, the phone boots into the other partition and designates it as the active partition. However, if the update fails, the phone never boots into the other slot altogether.

The other set of devices with A-only partitions have a single recovery partition, whereas A/B devices’ recovery partition is split inside the boot image along with the kernel. This is why you will first need to boot the TWRP image via Fastboot (as you will see later) and then patch the recovery partition, which will install TWRP in both boot_a and boot_b partitions.

1. Download the Treble Check app from the Play Store.
2. Launch the app, and go to “Seamless System Updates.”
3. If the app reads “…and is detected to have an A/B system partition,” then you have an A/B partition, otherwise your devices uses a single A-only partition.

Step 4: Installing TWRP (A/B & A-Only)

Head on over to TeamWin’s official website, find if your device is listed in the list of supported devices and download the TWRP image (.img) file. Then follow the steps down below:

1.Non-A/B Partition (A-Only)

For this type of partition scheme, you will generally need to flash the recovery only once. To do this follow the steps down below.

1. Power off your phone, hold the Volume Down + Power buttons until you see the Fastboot screen.
2. Connect your phone to PC using a USB cable.
3. Open Platform Tools using Command Prompt or Terminal.
4. Type “fastboot flash recovery [recovery file name].”
5. Wait till the flashing process completes. Once you see “Finished,” you can reboot into TWRP by powering off your phone and then holding Volume Up + Power.

2. A/B Devices

For devices using an A/B partition scheme, the installation process is slightly different from the method above. In this case, you’ll not only need the previously downloaded .img file, but also a separate TWRP recovery .zip file.

1. Download the .zip file for TWRP and store it into your phone’s partition. It is recommended to use an external SD card or an OTG cable with a USB to store this file.
2. Power off your phone, hold the Volume Down + Power buttons until you see the Fastboot screen.
3. Connect your phone to PC using a USB cable.
4. Open Platform Tools using Command Prompt or Terminal.
5. Type “fastboot boot [recovery file name].“
6. In TWRP, tap on Install > Swipe to confirm flash > Reboot.

Step 5: Rebooting into Recovery

Now that TWRP is installed, there are two ways you can access TWRP. One using ADB and other using the physical buttons on your mobile phone.

1. ADB: In Fastboot mode, type “fastboot reboot recovery.”
2. Directly via Physical Buttons: When the phone is powered off, tap and hold the Power + Volume Up buttons. When you see the Xiaomi, Redmi or POCO logo, release the Power button.

MIUI vs HyperOS Flashing

Flashing TWRP or any other custom recovery onto any phone (not just Xiaomi) follows a similar basic procedure. You essentially use the ADB Platform Tools to flash the TWRP.img file onto your phone’s partition. However, the key difference lies in how Xiaomi’s different operating systems (HyperOS and MIUI) allow you to unlock the bootloader.

For MIUI, the process was straightforward. You simply needed to enable OEM Unlocking permissions and then initiate the unlock countdown timer using the Mi Flash tool. However, Xiaomi has implemented stricter restrictions on newer devices running HyperOS, making bootloader unlocking slightly more complex. We have a detailed guide available if you’d like to follow the process.

In addition to this, older Xiaomi devices might use either A-only or A/B partition schemes. This difference can make the flashing process slightly more selective, but the steps mentioned above also explain, in detail on how to identify your phone’s partition scheme.

READ MORE: How to Install HyperOS Moon Super Wallpaper on Any Android ➜

Conclusion

This guide outlines all of the important procedures for flashing TWRP onto your Xiaomi device. It caters to both device partition types (A/B & A-only) and both operating systems, including MIUI and the newer HyperOS. However, be aware that improperly following these instructions could permanently brick your device.

The post How to Flash TWRP in Xiaomi Devices? [5 Easy Steps] appeared first on Appuals.

Typically, screen flickering indicates a display problem, often requiring replacement options. Yet, if there are no visible signs of damage — it’s likely a firmware glitch.

But don’t worry! This setback does not mark the end of your Xiaomi journey but rather an opportunity to troubleshoot the issue at hand and unlock the full potential of your Xiaomi experience.

Xiaomi Phone Flickering Issue — Explained

Imagine being on the verge of winning an intense gaming session, only for your display to suddenly start continuously flickering and jittering. To make matters worse, the brightness may even drop by 20%. A winning game slipping away before your eyes, no doubt.

Unfortunately, this frustrating scenario is all too common for many Xiaomi users. The issue predominantly affects the Redmi Note 10 and 11 series, but that doesn’t leave other Xiaomi smartphones immune. While it could either be a software or hardware issue, there’s typically no specific pattern to the screen flickering, making it difficult to pinpoint. Talk about having a mind of its own!

READ MORE: How to Remove Ads from Lock Screen in Xiaomi, POCO, Redmi Devices? ➜

What Causes the Xiaomi Phone Flickering Issue?

The primary reason behind Xiaomi phone flickering issues lies in the transition from LCD to OLED display technology in newer models. LCD and OLED displays differ in their methods of controlling brightness, with LCD utilizing Pulse Width Modulation (PWM) and OLED employing DC Dimming.

PWM adjusts brightness by rapidly toggling pixels on and off, usually at a frequency imperceptible to the human eye under normal conditions. However, at low brightness levels, some individuals may notice flickering. Conversely, DC Dimming modifies brightness by directly adjusting the voltage supplied to the display, bypassing the flickering problem associated with PWM.

However, this is not the sole reason that can lead to your phone screen flickering. Other common causes include:

• Issues with the display panel of your device.
• Software glitches or problematic apps.
• Physical damage due to dropping your phone.
• Hardware issues such as a faulty built-in component.
• Your phone has been exposed to water damage.
• Long-term usage of your phone can affect the screen display.

READ MORE: How to Fix Screen Flickering Issues on Windows 11 ➜

10 Fixes for Xiaomi Phone Flickering Issue

The initial step in resolving the issue at hand is determining whether it originates from software or hardware. Typically, software issues can be resolved through troubleshooting or software updates. However, if it’s hardware-related, such as screen damage, you may need to replace the screen or seek help from a professional technician.

1. Reboot Your Phone

Troubleshooting should always start with basic methods. If you’ve been using your device for a while and can’t recall any physical damage, but have recently encountered issues, especially within certain apps, it’s likely a software glitch or application bug.

Most CPU-intensive games consume significant system resources and may even cause screen flickering. When this occurs, immediately quit all running processes and applications, and even reboot your device. Doing so helps clear the memory, leading to a smoother user experience, improved performance, and resolution of system-related issues.

1. Hold down the Power button for approximately 5 seconds.
2. Drag the slider down to Reboot.
3. Alternatively, you can drag the slider up to Power off.

4. Once the device is completely shut off, hold down the Power button again to reboot it.

READ MORE: How to Fix Xiaomi Phone Keeps Restarting Randomly Issue? ➜

2. Enable Anti-Flicker Mode

Xiaomi is well-aware of the drawbacks that come with OLED displays. For this reason, it features an Anti-flicker mode to help bypass the screen flickering. It works by stabilizing the current or voltage supplied to the OLED pixels, thereby reducing flickering issues that may occur, especially at lower brightness levels.

1. Go to Settings > Display & brightness > Anti-flicker mode.

2. There, select the Anti-flicker option.

3. Turn Off Auto-Brightness

If you’ve enabled auto-brightness, your device adjusts the display illumination based on light sensor data. However, this could be problematic for those experiencing screen flickering when the brightness fluctuates. This issue typically arises from damage to the internal display components. In such cases, it’s best to disable the auto-brightness feature and keep your display at a constant brightness level.

1. Launch the Settings app.
2. Scroll down and go to Display & brightness.
3. There, toggle off Automatic brightness and Sunlight mode.

READ MORE: What to do if your Android screen keeps dimming? (6 Easy Fixes) ➜

4. Disable Reading Mode

Another quick fix for the stated issue is to disable reading mode or blue light filter in your Xiaomi phone. Such features adjust the color temperature of the screen to reduce the amount of blue light emitted, which can strain the eyes, especially during nighttime use.

However, this adjustment requires additional processing power from the device, causing screen flickering issues if the device is already struggling with performance. Disabling it conserves resources like processing power and memory, which can help stabilize the device’s performance and potentially alleviate screen flickering.

1. Go to Settings > Display & brightness > Reading mode.

2. There, toggle off Reading mode.

5. Run Your Device in Safe Mode

A quick way to determine whether screen flickering results from physical damage or software conflicts is to run your device in Safe mode. This diminishes background activity and limits third-party apps and services.

If the flickering stops once you enter Safe mode, return to the regular smartphone experience and begin by updating all installed apps. If that doesn’t prove effective, try uninstalling apps one-by-one to identify the problematic program.

1. To enter Safe mode on Xiaomi phones, press the Power button and Volume up button simultaneously, then drag the slider to Power off your device.

2. Once shut down, long-press the Power button and Volume up button.
3. When the Xiaomi logo appears on the screen, release the Power button and continue holding the Volume up button.
4. This will display the Recovery Mode Main Menu. Use the Volume down button to navigate to Safe Mode and select it with the Power button.

5. You may exit Safe mode by simply Rebooting your device.

READ MORE: How to Start Your Mac in Safe Mode [Step-by-Step Guide] ➜

6. Update Your OS

Many Xiaomi users were able to resolve this error by updating their operating system to the latest available version. These newer updates include patch fixes for widely reported issues. Since Xiaomi itself acknowledged the phone flickering issue, it’s only a matter of time before the developers roll out a comprehensive fix. So, keep an eye out for an update and install it immediately.

1. Go to Settings > About phone.

2. Tap on Update if a new version is available.

7. Disable Hardware Overlay

If flickering occurs only during intensive graphic tasks, consider disabling hardware overlay. Your phone dynamically decides whether to use the CPU or GPU for rendering graphics. While this transition is typically smooth, a damaged or problematic device may struggle with image layering, leading to flickering caused by a minor delay between tasks when the phone has nothing to display.

Disabling hardware overlay directs the task solely to the GPU, stabilizing the display output and potentially resolving the flickering issue.

1. Go to Settings > About phone.
2. Tap on the OS version repeatedly (around 7 times) until a “You are now a developer!” message appears.

3. Go back to the main page and navigate to Additional settings > Developer options.

4. Scroll to the Hardware accelerated rendering section and toggle on Disable HW Overlays.

5. Exit the mode by toggling off Developer options at the very top.

READ MORE: How To Turn Off Discord Overlay in Games? [2024 Update] ➜

8. Clear Cache

All programs store cache to retrieve data quickly for consecutive use. While this is helpful, the cache can become corrupted when storage is full, hindering device performance and causing unknown glitches. If this is the reason behind screen flickering, clearing the cache memory will likely resolve the issue.

1. Go to Settings > Apps > Manage Apps.

2. Select each application and tap Clear data.
3. Choose Clear all data or Clear cache.

In addition, you can also clear the cache partition, which stores temporary, obsolete, and residual files your phone may need in the future. Doing so will clear up memory of the entire system, optimizing resources and resolving screen flickering.

1. Launch the Cleaner app.
2. Go through each category to select the files you assume would be safe to remove.
3. Tap Clean up to get rid of the data.

READ MORE: Clearing Cache in Android – What, Why and How? ➜

9. Factory Reset Your Device

Clearing cache and memory is safe and does not delete important media and data on your phone. However, if the problem persists, it’s time to consider factory resetting your Xiaomi device. This action will erase all data and configured settings, restoring your device to its default state.

1. Go to Settings > About phone > Factory Reset.
2. Tap on Erase all data and choose Factory Reset.

3. Wait for security countdown to finish then tap Next.
4. Again, wait for the countdown to finish then tap OK.

READ MORE: What to do Before Resetting Your Android Phone? ➜

10. Go to a Professional or Expert

If you recently dropped your phone, exposed it to water or moisture, or damaged it in any way, the display may have been affected. You can verify this by dialing the code #*#*6484*#*# on your Xiaomi smartphone to run diagnostics for the touch sensor, display, light sensor, and flicker sensor.

If you suspect internal panel damage or malfunctioning screen pixels, it’s likely a hardware issue. In this case, contacting Xiaomi customer service to schedule an inspection is recommended. Repair or replacement may be the only option to salvage the functionality of your display at this point.

Conclusion

There’s a significant cost involved in opting for screen repair or replacement options, even if no hardware fault is found after inspection. Hence, it’s worth trying these methods first. While Xiaomi smartphones may not be the best in the market, they don’t compromise on manufacturing quality.

Issues like screen flickering can arise due to the delicacy of internal components, which can malfunction at any time, sometimes without a clear reason. But don’t fret! Screen flickering does not signal the end of your phone’s life. There are solutions available to address the issue and restore normal functionality.

The post 10 Ways to Fix Your Xiaomi Phone Flickering Issue [2024] appeared first on Appuals.

The procedure for unlocking your Xiaomi device running HyperOS differs partially from that for users running MIUI. This guide will provide a detailed explanation of the new process, as well as the necessary elements to consider before starting to unlock your phone’s bootloader.

How Do Bootloaders Work?

The bootloader is essentially the first element that binds your phone’s hardware to its software. It contains codes that are executed before your phone runs the operating system. These codes are responsible for directing the system to load the operating system’s kernel, which in turn initializes the full operating system.

In the early stages of computing, physical switches had to be manually configured to specify the memory location from which programs were to be loaded. Bootloaders revolutionized this process by automating the loading sequence, eliminating the need for any sort of manual intervention. Their primary function is to locate and initiate the loading of the operating system kernel from the specified memory location.

The issue, however, is that once the operating system is loaded, it can’t be tinkered around with since it is locked to external modifications. This is why there’s a bootloader mode that essentially gives you basic access to I/O, system memory, and designated partitions to then update the firmware or wipe the system partition.

Locked vs. Unlocked Bootloader

Almost all phones nowadays come with a locked bootloader out of the box, which permits only packages signed by the respective OEM (in this case, Xiaomi) to make specific changes to system files. However, an unlocked bootloader enables third-party software to execute packages and commands to flash programs such as custom recoveries (e.g., TWRP, OrangeFox), and eventually, to root your device or install custom ROMs.

READ MORE: How to Root HyperOS Using Magisk in 3 Easy Steps ➜

How to Unlock Bootloader on HyperOS Devices?

Xiaomi has introduced several new restrictions, or more precisely, barriers to the procedure for unlocking the bootloader of your phone running HyperOS. This was likely done to decrease the number of users switching to a different operating system, or simply to discourage root access. Whatever the reason may be, Xiaomi is trying to encourage more people to remain within the HyperOS ecosystem.

For phones running HyperOS, here are the restrictions that must be adhered to before starting the process of unlocking your phone’s bootloader.

1. Your Xiaomi account must be at least 30 days old to register for an unlock request.
2. Only Xiaomi accounts registered outside Mainland China can apply for an unlock.
3. Unlock privileges are time-sensitive, and need to be re-applied after expiration. This time is usually a year. You’ll need to submit a new request again the next year if you’ve locked your device again.
4. You can unlock up to 3 devices per account. This account is bound to a specific phone number.

Step 1: Get the Xiaomi Community app

The first step is to download the Xiaomi Community app, if you haven’t already. In most regions, it typically does not come pre-installed. To install the app, follow these steps:

1. Open the Play Store app on your phone.
2. Search for “Xiaomi Community.”
3. Identify the app with the matching name developed by Xiaomi.
4. Tap “Install.”

READ MORE: How To Restore Background Play Option in HyperOS? ➜

Step 2: Set-up the Xiaomi Community app

Once you have the Xiaomi Community app, you will need to sign in to the Mi account that is already associated with your phone. The app can manually detect and quickly log into that account automatically. Here’s how to do it:

1. Launch the Xiaomi Community app.
2. Agree to the Privacy Policy and User Agreement by tapping “Agree.”
3. On the login screen, select “Sign in / Sign up.”
4. If prompted, grant the app permission to access your Mi Account for a quicker login by tapping “OK.”
5. You will then be automatically signed in to the Xiaomi Community app.

Step 3: Switch to the “Global” Region

For most users, after logging into their accounts, it will be associated with their respective countries or regions. In this case, you won’t be able to see the option for submitting a request to unlock your phone’s bootloader. To do this, you’ll need to manually change the region to “Global” to see the options. Follow the steps below to do this:

1. Launch the Xiaomi Community app.
2. Navigate to the “ME” tab located on the bottom bar.
3. Select “Set up.”
4. Locate and tap “Change region.”
5. Choose “Global” from the available regions.
6. Confirm the change by tapping “Yes” when prompted.
7. Sign back in to the app. Once you do, the “Unlock bootloader” option should now be available within the “ME” menu.

Step 4: Submit an Unlock Request

Once everything is set up, the next step is to submit an unlock request. You can do this through the Xiaomi Community app itself.

1. Open the Xiaomi Community app.
2. Navigate to the “ME” section from the bottom bar.
3. Tap on “Unlock bootloader.”
4. You’ll see a “Read Me” page with a list of eligibility instructions and the unlocking tutorial. At the bottom of it, tap on “Apply for unlocking.“

READ MORE: How to Install Mi Dialer in HyperOS in 6 Easy Step [2024] ➜

Step 5: Enabling OEM Unlock within HyperOS

After you’ve received approval from the Xiaomi Community app to unlock the bootloader for your device, the next step is to associate that Mi account (which has received the approval) with your phone. You’ll do this by enabling Developer options and then adding your account to the phone.

 Enable USB Debugging

To enable USB Debugging, follow the steps below:

1. Go to Settings and tap on “About Phone.”
2. Look for the “OS version,” and tap on it several times till you see the message: “You are now a developer.”Enabling “Developer options” in HyperOS
3. Head back to Settings and scroll down to find “Additional settings.” Tap on this.
4. Scroll down to “Developer options,” and tap on it.
5. Look for “USB debugging,” and turn the toggle on.Enabling “USB debugging” in HyperOS
6. In the confirmation dialog that pops up, tap “OK.The (HyperOS) precautionary dialog box

 Enable OEM Unlocking

Once Developer options are enabled, head on there and add your Mi account to your phone. But before doing this, enable OEM Unlocking.

1. Go to Settings > Additional settings > Developer options.
2. Toggle the switch in front of OEM unlocking to on.
3. When prompted, tap “Enable.”

Step 6: Link Your Mi Account to the Phone

The next step is to link your Mi account to your phone so that it recognizes what devices are connected to your Mi account, specifically for the purpose of unlocking your phone. Keep in mind that for this step, you will need to turn off your Wi-Fi and enable Mobile data, otherwise you won’t be able to associate your account to the phone.

1. Go to Settings > Additional settings > Developer options.
2. Tap on “Mi Unlock status.”
3. When prompted, tap on “Agree.”
4. Tap on “Add account and device.”

Once you linking your Mi account to your phone, it will initiate the unlock timer and a mandatory waiting period of 168 hours (7 days) will start. This is a fixed timeframe, and unfortunately, there is no known way to shorten it.

READ MORE: The Best Custom Android ROMs in 2024 Ranked ➜

Step 7: Finish Unlocking via Mi Flash Tool

To complete the entire procedure, make sure that you actually unlock your device. This will be done using the Mi Flash tool, and you will need a PC for this.

1. Install the Mi Flash tool.
2. Open the app and sign in with your Mi account.
3. Power off your phone and press the Power and Volume down button simultaneously to enter Fastboot mode.
4. Connect your phone to the PC via a USB cable.
5. Once the connection is successful, click the “Unlock” button in the Mi Flash tool to unlock the device’s bootloader.

Should You Unlock the Bootloader?

There is no definitive answer to this, as the use case varies from situation to situation, with each user having different reasons to unlock the bootloader. Perhaps you want to flash a custom ROM, root your device, or install third-party packages and a custom recovery. However, there are reasons why many OEMs don’t allow or make it increasingly difficult to unlock the bootloader in the first place.

Unlocking your phone’s bootloader can pose serious security risks and vulnerabilities, which can be challenging for newbies and beginners to deal with. The implications of this may extend beyond what is gained from unlocking the device.

In short, it is advisable to thoroughly research before attempting to unlock your device. If possible, experiment with a device that doesn’t contain important data. Not only is security a major concern, but sometimes, failing to follow the proper procedure while flashing a custom ROM or rooting your device can easily result in permanently damaging your device.

READ MORE: How to Install HyperOS Moon Super Wallpaper on Any Android? ➜

Conclusion

The methodology outlined above goes into detail in explaining each step for unlocking your device’s bootloader if it runs HyperOS. For users running MIUI, this won’t be applicable as they will adhere to the older guidelines for unlocking their phones.

The post How to Unlock Bootloader on HyperOS Devices in 7 Easy Steps appeared first on Appuals.

This article will provide a detailed guide on rooting your Xiaomi device running HyperOS. We will cover both the risks involved and the procedures to follow for a safe root process.

What is Xiaomi HyperOS?

HyperOS is an Android-based operating system for Xiaomi devices, which replaced MIUI in 2023. Although presented as a complete overhaul, the software isn’t really that different from its predecessor, and most of the customization options are, more or less, the same.

Rooting HyperOS

For HyperOS, Xiaomi hasn’t made many changes under the hood, resulting in a user experience that is quite similar to that of MIUI. This extends to rooting the device as well since most of the procedure is mainly the same.

Rooting is the process of gaining privileged control over a device’s subsystems. It grants you deeper control over your phone’s hardware, allowing you to bypass potential restrictions set by the manufacturer or the Android operating system.

READ MORE: How to Install HyperOS Moon Super Wallpaper on Any Android? ➜

Rooting HyperOS Using Magisk

The main idea behind rooting HyperOS using Magisk is to first obtain the phone’s, or rather HyperOS’, boot.img file. This file would then be provided to Magisk, which will handle the patching process and prepare a new file that can be flashed onto the phone.

Before starting the root process, it’s important to note that achieving root access on HyperOS requires unlocking your device’s bootloader. This can be done via the official route by submitting an unlock request to Xiaomi. However, the entire procedure carries a waiting period of approximately 168 hours before you can successfully unlock your device.

Pre-Requisites

Here are some of the elements to keep in check before you start the root process. Some of these are already discussed in detail above.

1. An unlocked bootloader.
2. A PC (for acquiring the boot.img file and later flashing it onto the phone).
3. A USB cable (for data transfer). You can also opt for a wireless transfer if that is what you prefer.
4. An active internet connection (to download required files).
5. Platform Tools (to use Fastboot commands to flash the patched boot.img file).
6. ADB Drivers.

 Enable USB Debugging

To enable USB Debugging, follow the steps below:

1. Go to Settings and tap on “About Phone.”
2. Look for the “OS version,” and tap on it several times till you see the message: “You are now a developer.”Enabling “Developer options” in HyperOS
3. Head back to Settings and scroll down to find “Additional settings.” Tap on this.
4. Scroll down to “Developer options,” and tap on it.
5. Look for “USB debugging,” and turn the toggle on.Enabling “USB debugging” in HyperOS
6. In the confirmation dialog that pops up, tap “OK.The (HyperOS) precautionary dialog box

Enabling USB Debugging will allow your phone to communicate with your PC later on in this procedure when the rooted recovery image file will need to be flashed back to the phone.

READ MORE: Is Unlocked Bootloader Needed to Flash Stock Firmware on LG?

1. Finding Your Phone’s “boot.img” File

The first step in rooting your phone is patching its boot.img file. This file is typically found within the payload.bin file, which is used to deliver OTA updates to your device.

1.1) Find the “payload.bin” file

1. Find the HyperOS Recovery ROM file online that matches your phone’s current OS version. Download the recovery file. This is usually in a .zip file format.

   

2. Extract the downloaded .zip file. Inside, you’ll find a file named payload.zip.

   

3. To extract the payload.bin file from the ROM’s zip, we’ll need the Payload Dumper Tool.

1.2) Extract the “payload.bin” File (Requires Python)

1. Download and install Python 3 (or newer) from the official website. During installation, make sure to check the option “Add Python to PATH.”
2. Download the Payload Dumper Tool from its official website. This will be a .zip file that will need to be manually extracted.
3. The extracted folder will contain several files, but our focus will primarily be the payload_dumper.exe file and two folders: payload_input and payload_output.

1.3) Acquire the “boot.img” File via Payload Dumper.

1. Copy the payload.bin file, previously obtained from the recovery ROM zip, into the payload_input folder.
2. Go to the parent directory containing the payload_input folder and run the payload_dumper.exe file.
3. This will extract the payload.bin file and generate a new file named boot.img within the payload_output folder. This is the file you need for the rooting process.

READ MORE: How to Install Mi Dialer in HyperOS in 6 Easy Step [2024] ➜

2. Patching the boot.img File

Once you’ve obtained the boot.img file, you’ll need to patch it. This can be done using the Magisk Manager app. However, you’ll first need to transfer the boot.img file to your phone. You can do this manually via a USB cable or wirelessly.

1. Download the Magisk Manager app directly on your phone from a reliable source (avoid third-party app stores).
2. Open the Magisk Manager app. Look for an option like “Install.” Here, you’ll likely see a prompt to “Select and Patch a File.”
3. Go to the location where you transferred the boot.img file on your phone’s storage. Select the file to patch it with Magisk.

3. Flashing the Patched Image File (via PC)

Magisk will patch your phone’s boot.img file and create a new file named “magisk_patched.img” within your phone’s Download folder. This file is important for the next step and has to be transferred back to your PC.

3.1) Setting Up Your PC

1. Make sure you have ADB drivers installed on your PC.
2. Head on over to the platform-tools folder and open a Command Prompt window.
   • In the address bar of the platform-tools folder, type “cmd” and press Enter. This will launch a Command Prompt window within that directory.

3.2 Booting into Fastboot Mode

1. Power off your phone completely.
2. Once off, hold down the Power and Volume Down buttons simultaneously until you see “FASTBOOT” appear on the screen, or an image of a bunny in a fur cap.

3.3) Connecting and Verification

1. Connect your phone to your PC using a USB cable.
2. In the Command Prompt window, type the following command and press Enter. This verifies if your computer recognizes the connected phone.

fastboot devices

3.4) Flashing the Patched Image

1. To flash the root image file, type the following command and press Enter. This will initiate the flashing process.

fastboot flash boot magisk_patched.img

3.5) Rebooting Your Device

1. Once the flashing process is completed, the Command Prompt will display “Finished.”
2. You can now reboot your phone manually, or type the command below in the Command Prompt window to trigger an automatic restart.

fastboot reboot

READ MORE: How To Restore Background Play Option in HyperOS? ➜

BONUS: Flashing Root Image File via Custom Recovery

If you already have the boot.img file patched via an external source, or have downloaded it directly from the internet (if you could find one), it could also be flashed using any custom recovery you have. Keep in mind that flashing this .img file using Mi’s stock recovery can render your phone unusable, so proceed with caution.

If you have a custom recovery flashed, such as Orange Fox, TWRP, etc., you simply don’t need to transfer the root image to a PC. This file could be directly accessed via recovery and easily flashed from there.

However, this method isn’t reliable since you would still need a PC. You see, if you root a boot.img file, that file has to correspond to the actual version of HyperOS you’re using, and with updates being pushed out almost every month, using the custom recovery method might not seem as usable as it sounds.

READ MORE: APatchLite – How You Root Your Android Without Magisk in 2024 ➜

Conclusion

HyperOS is among the easier operating systems to root, and the steps outlined above provide a complete methodology to do so. Keep in mind that before rooting, you will need an unlocked bootloader and be willing to take the risk of voiding your phone’s warranty. For most people, the benefits of rooting clearly outweigh these compromises that come with it.

The post How to Root HyperOS Using Magisk in 3 Easy Steps [2024] appeared first on Appuals.